VESDA -E VES-A00-P Product Manual page 37

Rotate the detector clockwise to position the large end of the detector's top-left, or top-right for an
l
inverted detector, keyhole over the head of screw B. Push the detector to the wall (Figure 4-29).
B
Rotate the detector anticlockwise, or clockwise for an inverted detector, to lock the detector on to the
l
screw (Figure 4-30).
12. Insert an M4 screw at the small end of the detector's bottom-left, or bottom-right for an inverted detector,
keyhole (Figure 4-31).
www.xtralis.com
Upright
Detector
Figure 4-28: Slide detector to the left
Upright
Detector
Figure 4-29: Position detector on the second screw
Upright
Detector
Figure 4-30: Rotate the detector
VESDA-E VES-A00-P Product Guide
Inverted
Detector
B
Inverted
Detector
Inverted
Detector
31