Remove The Fascia - VESDA -E VES-A00-P Product Manual

VESDA-E VES-A00-P Product Guide
7.4

Remove the Fascia

Several maintenance functions require that the fascia be removed from the VES-A00-P detector in order to
perform them.
Caution: Electrostatic discharge (ESD) precautions need to be taken prior to removing the fascia from
the detector. A wrist strap must be connected to the case of the detector (Figure 7-7).
Attention : Les precausions contre le decharge electrostatique dois etre respecter avant d'ouvrir le panneau
du detecteur. Un bracelet doit être raccordé au panneau du détecteur (Figure 7-7).
Remove the Fascia
1. Turn off the 24V DC power to the detector.
2. Remove the two screws along side the door hinge, as shown below in Figure 7-8.
84
Figure 7-7: Wrist Strap application
www.xtralis.com