VESDA -E VES-A00-P Product Manual page 88

VESDA-E VES-A00-P Product Guide
3. Tilt the filter towards the left-hand side of the detector (Figure 7-3). The filter has hinge pins at its base
which allow it to be tilted on the chamber manifold.
Figure 7-3: Tilt Filter towards the left-hand side of the detector
4. Lift the filter out of the detector case (Figure 7-4).
Reinstall the Filter
Note: Ensure that the new filter is free of lint and dust.
1. Tilt the filter towards the left and position its hinge pins in their recess (Figure 7-5).
82
Figure 7-4: Remove Filter
www.xtralis.com