VESDA -E VES-A00-P Product Manual page 36

VESDA-E VES-A00-P Product Guide
D
Upright
Detector
8. Remove the mounting template.
9. In order to allow the detector to be positioned, retract the inlet and exhaust pipes and electrical conduit.
10. Mount the detector onto the screws using the keyholes using the following steps:
Upright
Detector
Position the right keyhole on the rear of the detector over the head of the right screw (A) (Figure 4-27).
l
Slide the detector to the left, or to the right for inverted detectors, to lock the detector on the screw
l
(Figure 4-28).
30
A
3/4 " IPS
25 mm
tec to r
of De
Ed ge
25 mm
3/4 " IPS
C
B
Figure 4-25: Position conduit and pipes
Figure 4-26: Mount the detector
A
Upright
Detector
Figure 4-27: Position detector over screw
B
Inverted
Detector
C
A
Inverted
Detector
A
D
Inverted
Detector
www.xtralis.com