Specifications - VESDA -E VES-A00-P Product Manual

2.7

Specifications

Specification
Supply Voltage
Power Consumption @24 VDC
Dimensions (WHD)
Weight
Operating Conditions
Please consult your Xtralis representative for
information on operation outside these parameters
or where sampled air is continually above 0.05%
obs/m (0.015% obs/ft) under normal operating
conditions.
Storage Conditions
(Non-operational)
Sampling Pipe Network
Inlet Pipe Size
Exhaust Pipe Size
Relays
IP Rating
Mounting
Cable Access
Cable Termination
Interfaces
Dynamic Range
www.xtralis.com
Table 2-2: VES-A00-P Detector Specifications
Value
18 to 30 VDC (24 VDC Nominal)
Aspirator
Power (Quiescent)
Power (In Alarm)
Peak current: 1.5A
350 mm x 225 mm x 135 mm
(13.8 in x 8.9 in x 5.3 in)
4.3 kg (9.5 lb)
Ambient: 0°C to 39°C (32°F to 102°F) *
l
Tested to (EN54-20): -10°C to 55°C (14°F to 131°F)
l
Sampled Air: -20°C to 60°C (-4°F to 140°F) **
l
Humidity: 5% to 95% RH, non-condensing
l
* Product UL listed for use from 0°C to 38°C (32°F to 100°F)
** Sampled Air temperature shall reach Ambient Detector
temperature upon entry into Detector. Refer to Xtralis Design
Guides & Application Notes for sampled air pre-conditioning.
Humidity: Dry (<95%)
l
Temperature: 0° to 85°C
l
Must not be exposed to sunlight or other radiation sources
l
Maximum length per pipe when using four straight
l
pipes:
Four pipe VES-A00-P: 70 m (230 ft)
l
Maximum total pipe length (with branches):
l
Four pipe VES-A00-P: 560 m (1,837 ft)
l
Pipe Modeling Design Tool: ASPIRE
l
Minimum airflow per pipe: 15 l/m
l
Note: Standards compliance of a particular pipe network
must be determined using ASPIRE.
External Diameter: 25 mm or 1.05 in (3/4" IPS)
l
External Diameter: 25 mm or 1.05 in (3/4" IPS) via
l
adaptor
12 programmable relays
l
Contacts rated 2A @ 30 VDC (Resistive)
l
Programmable to latch or not latch alarm or fault states
l
IP 40
(not UL tested)
Upright or inverted
4 x 26 mm (1 in) ports
Screw terminal blocks (0.2-2.5 sq mm, 24-14 AWG)
USB (Type 2)
l
Ethernet (RJ45)
l
WiFi, 802.11 b/g/n
l
0.0002%/m to 32%/m (10%/ft to 0.00006%/ft)
VESDA-E VES-A00-P Product Guide
Setting 1 Setting 5
7.9 W 9.7 W
8.5 W 9.9 W
Setting 10
14.8 W
14.5 W
9