Product Hardware Features - TRENDnet TEW-815DAP User Manual

TRENDnet User's Guide
Performance
Next Generation Wireless AC
802.11ac provides uninterrupted HD video streaming in a busy connected
environment
Simultaneous Dual Band
High performance 1.3 Gbps Wireless AC + 450 Mbps Wireless N bands
Wireless Coverage
Extended wireless coverage with MIMO antenna technology
Compatibility
Compatible with legacy wireless devices
Gigabit Port
Gigabit LAN port maintains high performance connections to the wired
network
Energy Savings
Embedded GREENnet technology reduces power consumption by up to
50%
IPv6
IPv6 network support
Targeted Beamforming
Increased real-time performance by directing stronger wireless signals to
your specific location
*For maximum performance of up to 1.3 Gbps use with a 1.3 Gbps 802.11ac wireless
client
** Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions
© Copyright 2014 TRENDnet. All Rights Reserved.

Product Hardware Features

Rear View
WPS Button
10/100/1000Mbps
Ethernet LAN Port
Reset Button
• Reset Button: Press and hold this button for 10 seconds to reset the access point.
• WPS Button (Wi-Fi Protected Setup): Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
• Ethernet LAN Port: Connect Ethernet cables (also called network cables) from your
access point to your router and wired network devices.
• Power Port: Connect the included power adapter from your access point power
port and to an available power outlet.
TEW-815DAP
Power Port
2