Product Hardware Features - TRENDnet TEW-814DAP User Manual

TRENDnet User's Guide
Extended wireless coverage with MIMO antenna technology
Compatibility
Compatible with legacy wireless devices
Gigabit Port
Gigabit LAN port maintains high performance connections to the wired
network
Energy Savings
Embedded GREENnet technology reduces power consumption by up to
50%
IPv6
IPv6 network support
Targeted Beamforming
Increased real-time performance by directing stronger wireless signals to
your specific location
* Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions. For maximum
performance of up to 867Mbps use with at least a 867MBps 802.11ac wireless clients
© Copyright 2015 TRENDnet. All Rights Reserved.

Product Hardware Features

Rear View
Reset Button
On/Off Power
Button
• On/Off Power Button: Press to turn the device on
• 10/100/1000 Mbps LAN Port: Connect Ethernet cables (also called network cables)
from your access point to your router and wired network devices.
• Reset Button: Press and hold this button for 10 seconds to reset the access point.
• WPS Button (Wi-Fi Protected Setup): Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
TEW-814DAP
WPS Button
10/100/1000 Mbps
Ethernet/LAN Port
3