TRENDnet User's Guide
Create Virtual AP (VAP)
The access point supports broadcasting multiple SSIDs, allowing the creation of Virtual
Access Points, partitioning a single physical access point into 7 logical access points,
each of which can have a different set of security, VLAN Tag(ID) and network settings.
Figure 3-2 shows multiple SSIDs with different security type and VLAN settings.
Multiple SSIDs with different Security Type and VLAN Tag
Sales Network
VLAN #1
Engineer Network
VLAN #2
Market Network
VLAN #3
Guest Network
VLAN #4
Accounting Network
VLAN #5
© Copyright 2016 TRENDnet. All Rights Reserved.
SSID 1
WEP
SSID 2
WPA-PSK/TKIP
WPA-PSK/AES
SSID 3
WPA2-PSK/TKIP
SSID 4
WPA2-PSK/AES
SSID 5
Virtual AP Overview
The administrator can view all of the Virtual AP's settings via this page.
Please click on Wireless -> Virtual AP Setup and the Virtual AP Overview Page appears.
VAP: Indicate the system's Virtual AP.
MAC Address: The MAC address of the VAP Interface is displayed here. When you
enable AP and reboot system, the MAC address will display here.
ESSID: Indicate the ESSID of the respective Virtual AP
Status: Indicate the Status of the respective Virtual AP. The Primary AP always on.
Security Type: Indicate a used security type of the respective Virtual AP.
MAC Filter: Indicate a used MAC filter of the respective Virtual AP.
Edit: Click Edit button to configure Virtual AP's settings, including security type and
MAC Filter.
TEW-740APBO
29