10.2 Connection of Power Supply
10.2.1 Connection of 1st Card's Power Supply
Supply the 24VDC power from the DC24IN connector or the I/O connector MJ2. When supplying the
24VDC power supply from the MJ2 connector, supply to all 24VDC pins and 0V (RG) pins. The 5VDC
power for control in the card is supplied from the control unit via the CF11 connector. When using as the
first card, the 5VDC supply is not required.
Downloaded from
ManualsNet.com
10. CONNECTION OF 200mA OUTPUT DI/DO UNIT HR378
10.2 Connection of Power Supply
search engine
I-135