Connection Of Manual Pulse Generator - Mitsubishi Electric MELDAS 60 Series Maintenance Manual

6.9 Connection of Manual Pulse Generator

To connect the manual pulse generators, connect an F020/021/022 cable to "HANDLE" on the HR211
card. Up to three manual pulse generators can be connected.
(Refer to Appendix 2.5 F020/021/022 Cable Manufacturing Drawings for cable details.)
Connecting one manual pulse generator
NO.1
12V 0V A B
Connecting two manual pulse generators
NO.2
12V 0V A B
CAUTION
Downloaded from ManualsNet.com
6. CONNECTION OF BASE I/O UNIT
6.9 Connection of Manual Pulse Generator
Manual pulse generator
FCUA-HD60
Rear view
4-M3
F020 cable
Manual pulse generator
FCUA-HD60
Rear view
NO.1
12V 0V A B
Incorrect connections could damage the device, so always connect the cable to the
designated connector.
Do not connect or disconnect the connection cables between each unit while the power is
ON.
search engine
4-M3
F021 cable
I-85
SKIP
ENC1
SV2 SV1
CR31
CF11
DCIN
R S232C RIO2
RIO1
HANDLE