Connection Of Control Unit; Connection Of Display Unit - Mitsubishi Electric MELDAS 60 Series Maintenance Manual

5.8 FCUA-KB10/KB12/KB20/KB30 and FCU6-KB021/KB022/031 NC Keyboard Unit

5.8.2 Connection of Control Unit

Connect the cable from the control unit to the FCUA-KB10/KB12 unit's "CR02" connector.
FCUA-KB20/30 and FCU6-KB021/KB022/KB031 do not have a connection.

5.8.3 Connection of Display Unit

Connect the CR03 cable connected to the "CR03" connector to the NC keyboard's "J1" connector.
For FCU6-KB022, connect the F054 cable connected to the "J1" connector to the "NCKB" connector of
FCU6-DUN22.
Connect the J2 cable from the display unit to the NC keyboard's "J2" connector.
For FCUA-KB20/30 and FCU6-KB021/KB031
For FCUA-KB10/KB12
Downloaded from ManualsNet.com
5. COMMUNICATION TERMINAL
FCUA-KB10/KB12
FCUA-KB10
CR03
CR01
CS1
CR04
CR02
CR05
FCUA-KB20/30
FCU6-KB021/KB031
J1
J2
FCUA-KB10/KB12
CR03 cable
J1
CR04
J2
search engine
SH21 cable
(FCUA-R000 cable)
The partner side connection is "AUX1".
(The connection position differs according
to the control unit.)
CR03 cable
CR03
J2 cable
(L=0.39m)
CR04-2 cable
J2 cable
(L=0.39m)
I-65
Ex.FCA64
AUX1
Ex. FCU6-DUT32
Ex. FCUA-EL10