Appendix 2.17 Fcua-R501 Cable Manufacturing Drawing; [External Plc Link Ii (Melsec Bus Connection) A3N Type] - Mitsubishi Electric MELDAS 60 Series Maintenance Manual

Appendix 2.17 FCUA-R501 Cable Manufacturing Drawing [External PLC link II
Application: Connection between extension
Assembly drawing
Connection diagram : Refer to the next page.
Manufacturing precautions
(1) The wire material shall be a shielded, 30-pair stranded cable equivalent to UL20276 Standard
(2) The parts used shall be Mitsubishi recommended parts. Equivalent parts may be used providing
(3) Attach the nameplate (with protective cover stamped with the cable name) in the position
(4) Fold the wire material shield over the sheath, and wrap copper foil tape over it. Then clamp with
(5) Part 1 (connector) and part 2 (connector case) are solderless types. If soldering types are
Downloaded from ManualsNet.com
APPENDIX 2 CABLE DRAWINGS

Appendix 2.17 FCUA-R501 Cable Manufacturing Drawing

(MELSEC bus connection) A3N type]
unit and MELSEC
(connector A3N type)
Extension unit side
1 2
2
AWG28 (0.08mm ).
they are compatible with the specifications.
designated in the assembly drawing.
the connector case frame.
required, use parts 10150-3000VE for the connector and 10350-52F0-008 for the connector case
(both parts manufactured by 3M).
search engine
Option (compatible connector set)
FCUA-CS501
MELSEC side
3 4 5
6
R501
No.
R501
1
2
3
4
5
6
I-214
List of parts used
Part name/model Manufacturer
Connector
3M
10150-6000EL
Connector case
3M
10350-3210-000
Connector
Hirose Electric
PC-1645
Connector case
Hirose Electric
P-1645A-CA (20)
Contact
Hirose Electric
PC-1600-211
Wire material
Product
UL20276
equivalent to left
AWG28 × 30P
Q'ty
1
1
1
1
45
(1)