How To Use The Wireless Headset; How To Use Bluetooth  Headset - NEC UNIVERGE DT930 User Manual

HOW TO USE THE WIRELESS
HEADSET
When using Wireless Headset (WT100 (APN-
91)/Voyager Legend CS (APN-91) (manufactured
by Plantronics)), you can answer a call, have a
conversation, or disconnect the call. This section
explains the terminal operation using Wireless
Headset.
The Headset key of Wireless Headset
must be programmed in advance. For
the programming of Headset key,
contact the system administrator.
For details on how to connect a
telephone and Wireless Headset, see
the manual attached to the Wireless
Headset.
To Answer a Call
1.
Press the Call control key of the Wireless Headset
while the terminal is ringing, and the Headset key
lights red. Depending on the setting at the
installation stage, you can answer the call by
pressing Answer key or Headset key instead of
Call control key.
2.
Press Call control key to finish the call, and the
Headset key turns off.
Even if a wired/EHS headset is
available, it cannot be used when a

Bluetooth
HOW TO USE Bluetooth

When using Bluetooth
call, have a conversation, or disconnect the call with
hooking operations. This section explains the
terminal operation using Bluetooth
If the Headset key of Bluetooth
programmed in advance, you can also
answer the call by pressing Headset
key. For the programming of Headset
key, contact the system administrator.
For details on how to connect a
telephone and Wireless Headset, see
"TO SET Bluetooth
manual attached to the Wireless
headset is connected.

HEADSET
headset, you can answer a

Headset.

is
DEVICE" and the
Headset.
To Answer a Call
1.
Press the Call control key of the Bluetooth
Headset while the terminal is ringing, and the
Headset key lights red. Depending on the setting
at the installation stage, you can answer the call
by pressing Answer key or Headset key instead
of Call control key.
2.
Press Call control key to finish the call, and the
Headset key turns off.
In case of using Bluetooth 
Headset
■ In the Voyager series, audio
response "Answer", "Ignore"
is not supported. To answer, press
talking button of Bluetooth
■You can answer the call only while
ringing.
■ In the Voyager series, long press on
talking button of headset performs
the DND. Only ringing of Bluetooth 
will be stop, not terminal-side.
This DND status is not synchronized
with the terminal.
■Pressing mute button while talking
make the terminal mute. End call
make the mute OFF.
This mute status is not synchronized
with the terminal.
■While the terminal is idle status,
pressing talking button twice will be
enabled "Last Number Redial"
feature in some of the available
Bluetooth
is not supported in this system.
Making call is not available.
■Because of characteristic of wireless,
ringing start or talking start will delay.
■In environments with many Bluetooth
devices, it may be difficult to find the
Headset to be used.
Make the Headset to be used
searchable (pairing status) first, and
then perform a search on the
terminal.
84
FEATURE OPERATION

headset.

headsets. But this feature
