To Register; How To Input Characters - NEC UNIVERGE DT930 User Manual

3.
Press system soft key (Del).
4.
After the deleting data, Press speaker key to end
operation.
Speaker key lamp goes off.

TO REGISTER

You can register the telephone number to the
system phonebook from call history.
1.
"TO DISPLAY HISTORY
Refer to
display the data to call.
2.
Press system soft key (<<<<).
3.
Press system soft key (ENTRY).
4.
Displayed the message for completion.

HOW TO INPUT CHARACTERS

The characters that can be input very depending on
the menu.
Example: Password input screen,
The input mode of "Password screen" is as follows.



The following shows the characters that can be
input for each menu.
TERMINAL PASSOWORD INPUT
Input mode "
other input mode is not available.
DATA" and
USER ID, PASSWORD (FTP/HTTPS
SERVER), THE FOLDER NAME, FILE
NAME AND ADDRESS (URI) INPUT
Input mode "
" English Character (lowercase)" and "
Number" can be selected.
IP ADDRESS INPUT
Input mode "1 number" can be selected. The other
input mode is not available. When is pressed, move
to the next input part.
55
"Number"
"English Character (capital letter)"
"English Character (lowercase)"
, or is shown above the input
area.
Number" can be selected. The
English Character (capital letter)",
The initial setting is "
Character (capital letter)".
When " * " is pressed, input mode is
changed.
Input mode switches over by pressing the
" * " repeatedly, and also it can be
switched by press local soft key 3 if there
is "Aa1". ("
English Character (capital
letter)"→" English Character
(lowercase)"→"
English Character (capital letter)").
OPERATION
English
number"→"