To Use The Shortcut - NEC UNIVERGE DT930 User Manual

TO USE THE SHORTCUT

Following explains how to use a shortcut.
For example, in case of making call of the Contact
person which is registered in the terminal phone
book.
1.
Select registered shortcut.
HOW TO SELECT A SHORTCUT
■ DT930 (24CG)
Use the cursor keys to move orange
focus to a desired shortcut and press
the enter key.
■ DT930 (Touch Panel model)
Tap the shortcut. Only when the item
is selected, the orange focus is
displayed for about 1 second.
■ DT920 (Self-Labeling model)
Press programmable key on the
sides of screen.
2.
Display profile screen.
Profile screen is displayed. It is possible to
make a call to the person by pressing local soft
key 2. You can also call by picking handset up,
pressing speaker key, or Enter key.
Please make sure the dial number is
focused, and make call.
When number is not focused, you
cannot make call.
To add and send a prefix.
Press soft key 3
profile screen.
Select " 1 Prefix" .
About prefix number setting, please refer
to "TO SET
Select the prefix number that you would
like to add.
Press local soft key 4.
You can call the number with prefix.
It is also possible to call by picking
handset up, pressing speaker key, or
Enter key.
40
OPERATION
(Option) on the
PREFIX"