NEC UNIVERGE DT930 User Manual page 55

CALL IS TERMINATED AND RINGING:
CALLED PARTY IS BUSY
CALL IS IN PROGRESS
CALL IS ON HOLD
SOFT KEY FEATURES
The following table describes features supported by
Soft key.
DISPLAY FEATURE
MIC Microphone
On/Off
DIR Dial By Name
HIST. Call History
DISCRIPTION
To turn the microphone
on and off for handsfree
calling.
To search for a desired
number in system
directory by name.
To display outgoing and
incoming call history. By
using Call History data, it
is possible to make a call
or register to the system
directory.
DISPLAY FEATURE
Call Pickup –
PICK
Group
FDA Call
Forwarding –
All calls
FDN Call
Forwarding
No
Answer/Busy
DND Do Not
Disturb
CB Call Back
Call Waiting –
CW
Set
VOICE Voice Call
Conference –
CONF
Three/Four
Party
Recall Recall
45
OPERATION
DISCRIPTION
To answer the call
directed to another
station within Call Pickup
-Group.
Regardless of the busy
or idle status, the
incoming call is
forwarded to the other
terminal.
The incoming call is
forwarded to the other
terminal when the
terminal is busy or no
answer for
predetermined time.
To restrict incoming calls
to the terminal. It is
possible to make a call
during Do Not Disturb is
set
To set automatic Call
Back when a busy or no
answer condition is
encountered. When the
called terminal becomes
available, the terminal
that set the Call Back is
called.
When the caller
encounters busy, the
caller can request to
answer the call with
burst tone. The called
party can answer the call
by placing the original
call on hold
To alert incoming call by
caller's own voice
instead of ring tone.
During two parties
connection, to add
another party to make a
conference call.
To finish a call and
hear the dial tone to
make an another call.