To Set Bluetooth  Device; To Enable Bluetooth  Function; Pairing And Connecting - NEC UNIVERGE DT930 User Manual

When the backup process ends in
failure, "Download Failed!" is displayed
on the LCD. Check to see the following
points and retry backup.
CHECK POINTS
Check whether the
download file is placed
in the folder of the
server or not.
Check if the file name
you entered is match
with that stored in
FTP/TFTP/HTTPS
server.
Is a download file a
terminal data file of the
same model?
Check whether IP
address/address (URI)
of FTP/TFTP/HTTPS
server is correct or not.
CHECK POINTS
Check whether the
power to
FTP/TFTP/HTTPS
server and network
equipment is ON or
not.
Check whether the
LAN cable is
connected securely.
If the retry of downloading fails many
times, the terminal may be in failure.
For details, please contact the system
administrator.
Other than above conditions, if
"Download Failed!" or "Upload Failed!"
is displayed, please contact the system
administrator.
ACTIONS
Place the download
file in the specified
folder of the server.
Enter the correct file
name which is stored
in FTP/TFTP/HTTPS
server.
Terminal data of the
different model can't
be downloaded.
Please download
terminal data of the
same model.
Set the proper IP
address/address
(URI) of
FTP/TFTP/HTTPS
server.
ACTIONS
Turn on the power.
Reconnect the cable
securely.
TO SET Bluetooth
Following items are available.
Equipment
Headset
Speaker
Bluetooth
DT930 (Touch Panel model).
Please contact dealer about available
Bluetooth
the recommended device, there may
be a case that it cannot connect with
terminal or operate properly.
Please keep the distance between the
terminal and a Bluetooth  device within
30 meters.
A maximum of 16 Bluetooth  devices
can be installed on the same floor
(approximately 10 square meters)
At first, to enable the terminal to be connected with
Bluetooth device.
TO ENABLE Bluetooth
1.
Display the Menu screen, and select "Settings"
2.
Select " 6 Option Device".
3.
Select " 1 Bluetooth"
4.
Select " 1 Bluetooth Mode"
5.
Select " 2 Enable"

PAIRING AND CONNECTING

1.
Display the Menu screen, and select "Settings"
34
TERMINAL SETUP

DEVICE
Product Name
Voyager 5200
Voyager Legend
Voyager Edge
Jabra Talk 45
Jabra Speak 810

device is available for

devices. If you do not use

function