To Check The Pairing Device And Dissconnect - NEC UNIVERGE DT930 User Manual

2.
Select " 6 Option Device".
3.
Select " 1 Bluetooth"
4.
Select " 2 Pairing"
5.
Select " 1 Inquiry"
While searching the Bluetooth device, display
shows as follows.
6.
Select device to pair.
Display example of inquiry list.
You can pair only one device.
If you want to pair new device, delete
the paired device from option menu at
pairing list screen at first.
One Bluetooth
paired to 2 terminals.
Multi point service is not supported.
When the
between Jabra Speak 810 and the
terminal is lost due to following, Jabra
Speak 810 does not automatically
reconnect to the paired terminal. In this
case, please execute pair from settings
again.
・From turn off to turn on Jabra Speak
810

headset cannot be
Bluetooth connection
・From turn off to turn on the
Bluetooth  module of the terminal
・Reboot the terminal
You can check the connecting status of Bluetooth
device with following status icons.
Icon Name
Bluetooth
Connecting
Bluetooth
not connected
Bluetooth
Error
In case of temporarily disconnection
between terminal and Bluetooth
by switch off or Bluetooth
Bluetooth
terminal when terminal switch on or
Bluetooth
Example using Voyager5200:
You can reconnect by press talk
button. Whether the device connect,
please check pairing list.
TO CHECK THE PAIRING DEVICE AND
DISSCONNECT
1.
Display the Menu screen, and select "Settings"
2.
Select " 6 Option Device".
3.
Select " 1 Bluetooth"
4.
Select " 2 Pairing"
5.
Select " 2 Pairing List"
6.
Check the connecting device.
" ◎ "indicates
connecting. If the device is not connected, " ◎"
is not displayed.
35
TERMINAL SETUP
Description
The condition of

connecting a terminal and

Bluetooth device
The condition of pairing a

terminal and Bluetooth
device but not connected

Bluetooth module in the

terminal have error.
Please contact
administrator.

mode off,

device reconnect to the

mode on.
that Bluetooth device


device
is