Call Forwarding - No Answer; To Set Call Forwarding - No Answer; To Verify; To Cancel - NEC UNIVERGE DT930 User Manual

CALL FORWARDING – NO
ANSWER
When a call is placed to a terminal that does not
answer, this feature forwards the call to another
terminal.
TO SET CALL FORWARDING - NO
ANSWER
The Soft key that is used as Call
Forwarding - No Answer is same as
Call Forwarding - Busy Line (Soft key
(FDN))
This feature is set by Soft key or
feature key. The feature key is set by
system data setting at initial
installation. For details, please contact
the system administrator.
1.
Press the Soft key (>>>>) repeatedly until display
shows "FDN" when Soft key is used.
2.
Press Soft key (FDN) or Call Forwarding - No
Answer feature key.
3.
Dial the desired target terminal number.
4.
After 4 second, return back to the idle screen
automatically. (or Press Speaker key)
Speaker key lamp goes off.
Line key lamp goes off.

TO VERIFY

1.
Press Soft key (FDN) or Call Forwarding - No
Answer feature key.
The terminal number of the forwarding
destination is displayed on the LCD.

TO CANCEL

1.
While being set the Call Forwarding - No Answer,
2.
Press the Soft key (>>>>) repeatedly until display
shows "FDN" when Soft key is used.
3.
Press Soft key (FDN) or Call Forwarding - No
Answer feature key.
4.
Press"* " key .
5.
After 4 second, return back to the idle screen
automatically. (or Press Speaker key)
Speaker key lamp goes off.
Line key lamp goes off.
CALL FORWARDING – ALL
CALLS
This feature allows all calls directed to a particular
extension to be rerouted to an alternate destination,
regardless of the busy or idle status of the
extension.
TO SET CALL FORWARDING - ALL
CALLS
This feature is set by Soft key or
feature key. The feature key is set by
system data setting at initial
installation. For details, please contact
the system administrator.
1.
Press the Soft key (>>>>) repeatedly until display
shows "FDA" when Soft key is used.
2.
Press Soft key (FDA) or Call Forwarding - All
Calls feature key.
3.
Dial the desired target terminal number.
4.
After 4 second, return back to the idle screen
automatically. (or Press Speaker key)
Speaker key lamp goes off.
Line key lamp goes off.
TO VERIFY
1.
Press Soft key (FDA) or Call Forwarding - All Calls
feature key.
The terminal number of the forwarding
destination is displayed on the LCD.
TO CANCEL
1.
While being set the Call Forwarding - All Calls,
2.
Press the Soft key (>>>>) repeatedly until display
shows "FDA" when Soft key is used.
72
FEATURE OPERATION