Appendix B. Input Characters; How To Input Characters (System); System/Station Speed Dialing Feature - NEC UNIVERGE DT930 User Manual

APPENDIX B. INPUT CHARACTERS

HOW TO INPUT CHARACTERS (SYSTEM)

SYSTEM/STATION SPEED DIALING FEATURE

Press the dial key to display the character. The character will be changed by repeatedly pressing the
dial. After displaying the desired character, press "#" or right cursor key.
Example: When inputting with "MARY SMITH",
6# 2# 777# 999# 0# 7777# 6# 444# 8# 44#
M A R Y
The following two input mode can be specified.
ABC: English input mode.

NUM: Number input mode.

Input mode switches over by pressing "*" repeatedly, and also it can be switched by press local soft key 3 if
there is "Aa1" ("ABC" → "abc" → "NUM").

Up to 4 characters can be entered for keyword searching.

Up to 16 characters can be registered for each name.

Up to 30 digits can be registered for each dial number.
(access code: up to 4 digits, called number: up to 26 digits)

The default setting is English input mode.

Please refer to
S M I T H
CHARACTER CODE TABLE
APPENDIX B. INPUT CHARACTERS
for the character that can be entered.
89