To Transfer A Call (Without Announcement); Last Number Redial; One-Touch Speed Calling Keys; To Program - NEC UNIVERGE DT930 User Manual

TO TRANSFER A CALL (WITHOUT
ANNOUNCEMENT)
After dialing the transfer destination number, it is
possible to replace a handset before answering the
destination party. When the transfer destination
party lifts the handset, it is automatically connected
with transferred party. The phone number of
transferred party is displayed on the destination
terminal.
INITIATE TRANSFER (BY EX.200)
1.
Call in progress.
Line key lamp lights green.
2.
Press Transfer key.
You will receive a special dial tone.
Calling party is placed on hold.
3.
Dial the destination extension number.
You will receive a dial tone.
The dialed extension number is displayed with
flash.
4.
Replace the handset.
Line key lamp goes off.
A call is transferred.
ANSWER TO A TRANSFERRED
CALL (BY EX.210)
1.
Ringing is heard.
Call Indicator Lamp flashes.
Line key lamp flashes red.
The extension number that initiates call
transfer is displayed on the LCD.
2.
Lift the handset to start a conversation with the
extension (200).
Call Indicator Lamp goes off
Line key lamp lights green.
When the destination party does not
answer within the predetermined time,
a recall is made to the terminal that
initiates call transfer. When recall is
received, the destination number is
displayed on the LCD.

LAST NUMBER REDIAL

It is possible to search and redial the phone number
up to 60 calls previously dialed.
1.
Press Left key or Soft key(OG) after press Soft
key (HIST).
Speaker key lamp lights red.
Line key lamp lights green.
2.
Press Soft key (￪Prev) or Soft key (￬Next) to find
desired number and press "#" key.
The number on LCD is automatically redialed.
3.
When party has answered, lift the handset.
Speaker key lamp goes off.
ONE-TOUCH SPEED CALLING
KEYS
This feature allows a terminal user to dial
frequently-called numbers by pressing a One-touch
key assigned for Station Speed Dialing.
Up to 32 digits can be registered for
each dial number.
The feature key is set by system data
setting at initial installation. For details,
please contact the system
administrator.

TO PROGRAM

Following explains how to register phone number
to a One-touch Speed Calling key.
1.
Press Feature key.
Feature key lamp lights red.
2.
Press One-touch Speed Calling key.
Feature key lamp flashes red.
Speaker key lamp lights red.
3.
Dial desired number.
Feature key lamp lights red.
4.
Press Feature key.
Feature key lamp goes off.
Speaker key lamp goes off.
62
FEATURE OPERATION