System; How To Select A System Soft Key; Sample Display - NEC UNIVERGE DT930 User Manual

SYSTEM

Call screen is displayed when you make a call,
receiving an incoming call, or using system service.
You can use system soft key instead of dialing
feature number. Available key is displayed
according to the terminal status.
Display patterns or name of system
soft key are set at initial installation.
For details, please contact the system
administrator.
System soft key icon

HOW TO SELECT A SYSTEM SOFT KEY

DT930 (24CG)
Use the cursor keys to move orange focus to a
desired system soft key and press the enter key.
DT930 (Touch Panel model)
Tap the system soft key. Only when the item is
selected, the orange focus is displayed for about 1
second.
DT920 (Self Labeling model)
Press programmable key on the sides of screen.
System soft key name
To display next system soft key page,
select ">>>>".
If there is no next page, ">>>>" is not
indicated.
Up and down cursor key are used for
adjustment volume on this screen. It is
not available for selecting system soft
key.

SAMPLE DISPLAY

Soft keys provide a set of functions on the LCD
according to the changing state of the terminal.
IDLE STATUS:
HEARING DIAL TONE/DIALING:
Push system soft key (>>>>):
44
OPERATION