Security Mode; To Lock Or Unlock Security Mode - NEC UNIVERGE DT930 User Manual

SECURITY MODE

By pressing the Security button, "Security Mode" is
activated to prevent the unauthorized access to the
menu setting or telephony services provided from
the system.
Security mode is available for DT930
only.
When the system administrator
invalidates the Security Mode, this
feature cannot be used. For details,
please contact the system
administrator.
If incorrect password is entered three
times consecutively, the terminal locks
up, and any key operation will be
disabled for 10 minutes. And the
number of failed passwords entry and
terminal lock up time are set by system
data setting at initial installation. For
details, please contact the system
administrator.
While the terminal is locked, key
becomes disabled. Also, any features
provided by the system, such as call
origination or call answering, cannot be
performed.
Even when the terminal is reset for any
reasons (such as power-off, etc.) while
the terminal is placed in Security Mode,
the lock is not released. For the way for
resetting Security Mode, please
contact the system administrator.
TO LOCK OR UNLOCK SECURITY
MODE
TO LOCK THE TERMINAL
1.
Press Security button on the terminal.
2.
The following message is displayed on LCD.
Press or Soft key (OK).
3.
The terminal is in Security Mode.
Security lamp lights red.
The Screen Saver will be activated.
TO UNLOCK THE TERMINAL
1.
Press any key while the Screen Saver is
activated.
The password entry screen is displayed on
the LCD.
2.
Enter the password, and press or Soft key (OK).
To cancel the Security Mode, the
"terminal password" is required. The
default password to release a security
lock is "0000". Be sure to change the
default password before placing the
terminal in Security Mode. For details,
please refer to
PASSWORD".
When the password entry ends in
failure, the following error message is
displayed.

Security Mode is continued by
pressing Soft key (Cancel).

Password retry screen is
displayed again when or Soft key
(OK) is pressed.
80
FEATURE OPERATION
"TO CHANGE