To Verify; To Make A Call; Station Speed Dialing; To Register For Station Speed Dialing - NEC UNIVERGE DT930 User Manual

If you dial a wrong number, you will
need to start again from the beginning.
To register a pause, press * or #
between any digits. (It is required
system data setting at initial
installation.) The pause cannot be
registered as a first digit.
When a phone number has been
already registered in One-touch key,
that number is displayed on the LCD.
The previous number will be cleared
when you register a new number.

TO VERIFY

Following explains how to confirm the registered
number in the One-touch Speed Calling key.
1.
Press Feature key.
Feature key lamp lights red.
2.
Press a desired One-touch Speed Calling key.
Feature key lamp flashes red.
Speaker key lamp lights red.
The registered number is displayed on LCD.
3.
Press Speaker key.
Feature key lamp goes off.
Speaker key lamp goes off.

TO MAKE A CALL

Following explains how to make a call with One-
touch Speed Calling key.
1.
Press One-touch Speed Calling key.
Speaker key lamp lights red.
The desired number is automatically dialed.
2.
When party has answered, lift the handset.
Speaker key lamp goes off.

STATION SPEED DIALING

This feature allows a terminal user to dial long-digit
or frequently-called numbers by pressing feature
key and abbreviated code.
TO REGISTER FOR STATION SPEED
DIALING
The feature is set to the terminal by
system data setting at initial
installation. For details, please contact
the system administrator.
1.
Press Feature key.
Feature key lamp lights red.
2.
Press Redial key.
You will receive a special dial tone.
Feature key lamp flashes red.
Speaker key lamp lights red.
3.
Dial desired abbreviated code.
Example: "09" is entered.
4.
Press "9" that is access code.
You will receive a confirmation tone.
5.
Dial the desired number.
6.
Press Feature key.
Feature key lamp goes off.
Speaker key lamp goes off.
TO MAKE A CALL USING STATION
SPEED DIALING
1.
Press Redial key.
Speaker key lamp lights red.
2.
Dial abbreviated code.
3.
The phone number is automatically dialed.
4.
Lift the handset.
Speaker key lamp goes off.

ORIGINATING A VOICE CALL

Instead of ringing, this feature informs the
incoming call by voice.
63
FEATURE OPERATION