To Set Time Format; To Enable/Disable Volume Level Display; To Set Screen Saver - NEC UNIVERGE DT930 User Manual

6.
Select a desired calendar format.
No. Calendar
1 Type1
2 Type2
3 Type3
4 Type4
5 Type5
No. Calendar
1 Type1
2 Type2
3 Type3
4 Type4
5 Type5

TO SET TIME FORMAT

Following explains how to set the time format for
display indicate.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 3 Display"
4.
Select " 1 Calendar format".
5.
Select " 2 Time format".
6.
Select a 12 hour or 24 hour indicate.
If the " 0 Automatic" is selected,
Indication depends on the system data
setting. For details, please contact the
system administrator.
TO ENABLE/DISABLE VOLUME
LEVEL DISPLAY
Determines whether or not to display the
following volume levels: handset receiver volume,
speaker volume, ringer tone volume and LCD
contrast volume.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
12 hour clock
MON 3 JUN 2019 3:13 PM
3 JUN MON 3:13 PM
JUN 3 MON 3:13 PM
6- 3 MON 3:13 PM
MON 3 JUN 3:13 PM
24 hour clock
MON 3 JUN 2019 15:13
3 JUN MON 15:13
JUN 3 MON 15:13
6- 3 MON 15:13
MON 3 JUN 15:13
3.
Select " 3 Display"
4.
Select " 2 Local Volume".
5.
Select whether to display the volume level.
If it is set to " 0 Automatic", the
" 2 Enable" is applied.

TO SET SCREEN SAVER

To set whether starting the Screen Saver when
the terminal is idle for a certain period of time.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 3 Display"
4.
Select " 3 Screen Saver".
5.
Select " 1 Screen Saver Mode".
6.
Select whether to Enable/Disable the Screen
Saver.
7.
Select " 2 Wait Time".
8.
Enter the Wait Time.
This terminal has a screen saver
enabled by default. If you disabled the
screen saver and the same screen is
displayed for a long time, an
afterimage may appear on the display,
but this is not a malfunction. The
afterimage is gradually eliminated by
changing the screen display. However,
if the same screen is displayed for too
long, the afterimage will not disappear,
so keep the screen saver enabled.
22
TERMINAL SETUP