Call History; To Start History; To Display History Data; To Call - NEC UNIVERGE DT930 User Manual

CALL HISTORY

This feature records information such as numbers
you have dialed or ones received from other parties.
And also it allows a terminal user to make a call
using the recorded data.
The history data of incoming and
outgoing calls are recorded in the system
memory. They are not recorded in the
terminal.
The outgoing call history can store up to
60 records per terminal. If the number of
registered records exceeds 60, the oldest
stored number is deleted and the new
number is stored.
This feature is by the system. Use the
system soft key to operate. To select
item, use the cursor key and Enter key.

TO START HISTORY

There are 2 operations to start history.

FROM LOCAL SOFT KEY
1.
Press local soft key 4 (History screen) at favorite
screen.

FROM CALL SCREEN
2.
Press local soft key 3 (System screen).
3.
Select system soft key (HIST).
Displayed following history screen.
Speaker lamp lights red.

TO DISPLAY HISTORY DATA

1.
Select "Outgoing" or "Incoming".
Press the system soft key (OG) / (IC) that you
desired.
Last call is displayed.
2.
Display the target data.
Press up/down key or system soft key (￪Prev)
/ (￬Next)

TO CALL

You can make call using history data.
1.
"TO DISPLAY HISTORY
Refer to
display the data to call.
2.
To Make call, use one of following operation

Pick handset up and press system soft
key (Redial)

Press system soft key (Redial) and press
speaker key.
You can make call the person of history data.

TO DELETE

You can make call using history data.
1.
"TO DISPLAY HISTORY
Refer to
display the data to call.
2.
Press system soft key (<<<<).
54
OPERATION
DATA" and
DATA" and