Uninstallation & Return; Removing The Product; Packing The Product; Disposing Of The Product - Alpha ESS SMILE-G3-S5 Manual

65
11 Uninstallation & Return

11.1 Removing the Product

Procedure
Step 1 Power off the product by following instructions in chapter 9.3 Powering Off the
Product.
Step 2 Disconnect all cables from the product, including communication cables, PV
power cables, battery power cables, AC cables, and PE cables.
Step 3 Remove the WiFi module from the inverter.
Step 4 Remove the inverter from the wall bracket.
Remove the battery pack from the wall bracket.
Step 5 Remove the mounting bracket.

11.2 Packing the Product

If the original packaging is available, put the battery pack or inverter inside it and then seal
it by using adhesive tape.
If the original packaging is not available, put the battery pack or inverter inside a suitable
cardboard box and seal it properly.

11.3 Disposing of the Product

If the battery pack or inverter service life expires, dispose of it
according to the local disposal rules for electrical equipment and
electronic component waste.
Dispose of the packaging and replaced parts according to the
rules at the installation site where the device is installed.
Do not dispose the inverter and the battery pack with normal
domestic waste.
UNINSTALLATION & RETURN
Li-lon