Alpha ESS SMILE-G3-S5 Manual page 45

ELECTRICAL CONNECTION
V a lu e
D is p la y
2. DTSU666-100/40mA: Three-phase meter (with CT)
When the meter is used as Grid meter, please follow the steps below to complete the
address setting by pressing the corresponding button and the number of times.
V a lu e
D is p la y
Meter Setting on AlphaCloud
When the system work mode is selected as DC, click the button under the "Grid Meter" to
turn the "Meter" in green.
When the system work mode is selected as AC or Hybrid, click the buttons under the
"Grid Meter" and "PV side meter" to turn the "Meter" in green.
Click "Save" and wait a few minutes to refresh the page.
When the "Meter Model" displays DTSU666 model, the setting is successful.
NOTE:
It is forbidden to tick CT to modify the CT ratio.
Meter Information
Grid Meter
Meter CT
CT
PV side meter
Meter CT
CT
*1 （ Step1）
SET
*2 （ Step2）
ESC
*1
SET
Meter CT Ratio
Meter CT Ratio
→
*1
*4 （ Step1）
*1 （ Step2）
Meter Model
Meter Model
44