Uninstallation & Return; Removing The Product; Packing The Product; Disposing Of The Product - Alpha ESS SMILE5 Installation, Operation & Maintenance Manual

Uninstallation & Return
11. Uninstallation & Return

11.1. Removing the Product

Procedure
Step 1: Power off the energy storage system by following instructions in Chapter

8.2 Powering Off the System.
Step 2: Disconnect all cables from the product, including communication cables,

PV power cables, battery power cables, AC cables, and PE cables.
Step 3: Remove the WiFi module.

Step 4: Remove the product from the wall bracket. Remove the expansion battery

from the wall bracket.
Step 5: Remove the wall brackets.


11.2. Packing the Product

If the original packaging is available, put the product inside it and then seal it using
adhesive tape.
If the original packaging is not available, put the product inside a suitable cardboard
box and seal it properly.

11.3. Disposing of the Product

If the product service life expires, dispose of it according to the

local disposal rules for electrical equipment and electronic
component waste.
Dispose of the packaging and replaced parts according to the

rules at the installation site where the device is installed.
Do not dispose the product with normal domestic waste.

103