Output Lock - Lightware MX-FR9 User Manual

   
4. Operation
Loading a Preset in Take Mode
Step 1. Press and release the Load Preset button.
Step 2. Press and release a source button according to the desired memory address (source 1 to 32).
Step 3. Press and release the Take button.
Now the selected preset is loaded.
ATTENTION!
Loading a preset modifies all output states that are not currently locked.
Saving a Preset in Autotake Mode
Step 1. Create the desired connections that need to be saved.
Step 2. Press and release the Save Preset button.
Step 3. Press and release a source button according to the desired memory address (source 1 to 32).
Now the current configuration is stored in the selected memory.

ATTENTION! Preset save action always stores the current configuration for all outputs including mute
state, but lock state is ignored.
MX-FR Series Modular Matrix Frames – User's Manual
Loading a Preset in Autotake Mode
Step 1. Press and release the Load Preset button.
Step 2. Press and release a source button according to the desired memory address (source 1 to 32).

ATTENTION!
4.4.8. Output Lock
DEFINITION:

muting can be executed on that particular output port.
Using Lightware routers it is possible to lock a destination's state. This feature prevents an accidental
switching to the locked destination in the case of an important signal. Destinations can be independently
locked or unlocked. Locking a destination does not affect other destinations.
View Locked Outputs in Take Mode
Step 1. Press and release the Output Lock button.
Step 2. The Output Lock button starts to blink and all the buttons of any locked destinations light up and
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
Now the selected preset is loaded.
Loading a preset modifies all output states that are not currently locked.
The Output lock means that an input port is locked to an output port and no input change or
remain illuminated for three seconds.
45
#lock #outputlock