Mx-Fr33L - Lightware MX-FR9 User Manual

   
3. Product Overview
3.9. MX-FR33L
Front View
USB control USB connection for Lightware Device Controller software.
1
Menu display Displays status information and menu operation.
2
Menu navigation Arrows, escape, and enter buttons for menu navigation.
3
Status LEDs CPU live LED blinks to indicate normal operation. Power LED shines green
4
when the router is powered on.
5 Control lock Press long to disable or enable front panel buttons. When it shines red, all
operations on front panel are prohibited.
6 Output lock Locks one (or more) outputs. Inhibits accidental input changing on the
protected output.
7 Source buttons Source buttons can be used to select an input or preset or to view the selected
input's state.
Destination buttons Destination buttons can be used to select an output, or view the selected
8
output's state.
Take / Auto Displays the current switching mode (TAKE or AUTOTAKE). Long press
9
toggles the switching mode, short press executes switching in TAKE mode.
q Preset buttons Load preset: apply a previously saved crosspoint preset from one of the
preset memories. Save preset: stores current crosspoint state in one of the
preset memories.
w EDID mode Switches the Menu display to EDID menu allowing EDID switch, EDID save etc.
e Signal present Displays live sources and attached sinks on source and destination buttons.
MX-FR Series Modular Matrix Frames – User's Manual
5
6
7
8
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
9
q
e
w
1 2 3 4
25