Switching Operations Flowchart; Preset Operations - Lightware MX-FR9 User Manual

   
4. Operation
4.4.6. Switching Operations Flowchart
Take Mode #takemode
source
button
pressed
idle
TAKE
mode
nothing pressed for 3 sec
destination
button
pressed
Autotake Mode
AUTOTAKE
same
all outputs
button
preselected
pressed
viewing select or
previewing
source deselect
connections
connections destinations
nothing pressed for 3 sec
TAKE
connections
button
realized
pressed
viewing
destination
connection
destination
button
pressed
idle
viewing last destination's
connection
mode
select or
connection
deselect
realized
destinations
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
MX-FR Series Modular Matrix Frames – User's Manual
4.4.7. Preset Operations

DEFINITION: A preset stores a configuration regarding all input connections and mute state for all
outputs. #preset

INFO: All Lightware matrix routers have 32 user programmable presets. All presets are stored in a non-
volatile memory; the router keeps presets even in the case of a power down. Memory numbers are
assigned to source buttons 1 to 32. If the frame has fewer buttons, the higher numbered presets are
accessible only through software control.
Saving a Preset in Take Mode
Step 1. Create the desired connections that need to be saved.
Step 2. Press and release the Save preset button.
Step 3. Press and release a source button according to the desired memory address (source 1 to 32).
Step 4. Press and release the Take button.
Now the current configuration is stored in the selected memory.

ATTENTION! Preset save action always stores the current configuration for all outputs including mute
state, but ignores lock state.
44