Mx-Fr80R And Mx-Fr65R - Lightware MX-FR9 User Manual

   
3. Product Overview
3.7. MX-FR80R and MX-FR65R
Front View
1 Menu display Displays status information and menu operation.
2 Menu navigation Up, down, left, right, escape, and enter buttons for menu navigation.
3
Status LEDs CPU live LED blinks to indicate normal operation. Power LED shines green
when the router is powered on.
USB control USB connection for Lightware Device Controller Software.
4
Take / Auto Displays the current switching mode of the router (TAKE or AUTOTAKE). Long
5
press toggles the switching mode, short press executes switching in TAKE
mode.
Preset buttons Load preset: apply a previously saved crosspoint preset from one of the
6
preset memories.
Save preset: stores current crosspoint state in one of the preset memories.
7 Signal present Displays live sources and attached sinks on source and destination buttons.
8 EDID mode Switches the Menu display to EDID menu allowing EDID switch, EDID save etc.
9 Control lock Disables or enables front panel operation. When it shines red, all operations
on the front panel are prohibited.
q Output lock Locks and protects one (or more) outputs. Inhibits accidental input changing
on the protected output.
Source buttons Source buttons have three functions: to select an input, to select a preset and
w
to view the selected input's state (only in TAKE mode).
Destination buttons Destination buttons have two functions: to select an output, or to view the
e
selected output's state.

ATTENTION! In the case of the MX-FR65R matrix the attached label can be seen on
the front panel.

INFO: The unlabeled buttons are disabled, and reserved for future developments.
MX-FR Series Modular Matrix Frames – User's Manual
Configured as
MX-FR65R
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
9
q
w
r
21
1
2
3
4
5
6
7
8