Editing An Edid; Creating An Edid - Lightware MX-FR9 User Manual

   
6. Software Control – Lightware Device Controller Software
6.6.4. Editing an EDID
Select an EDID from the Source panel and press the Edit button to display the Advanced EDID Editor window.
The editor can read and write all descriptors that are defined in the standards, including the additional CEA
extension. Any EDID from the device's memory or a saved EDID file can be loaded into the editor.
The software resolves the raw EDID and displays it as readable information to the user. All descriptors can
be edited, saved in an EDID file, or uploaded to the User memory. For more details about EDID Editor, please
visit our website (www.lightware.com) and download the EDID Editor user's manual.
The EDID Editor Window
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
MX-FR Series Modular Matrix Frames – User's Manual
6.6.5. Creating an EDID
Since the Advanced EDID Editor mentioned above needs more complex knowledge about EDID, Lightware
introduced a wizard-like interface for fast and easy EDID creation. With Easy EDID Creator, it is possible to
create custom EDIDs in four simple steps.
By clicking on the Create button below Source panel, Easy EDID Creator is opened in a new window. For
more details about EDID Editor, please visit our website
filedownloader/file/Application-Note/EDID_Editor_Application_Notes.pdf) and download the EDID Editor
user's manual.
The Easy EDID Creator Window
(https://lightware.com/pub/media/lightware/
94