System Requirements; Establishing The Connection; The Layout Of The Built-In Web - Lightware MX-FR9 User Manual

   
5. Software Control - The Built-in Web
5.1. System Requirements
Supported Operating Systems: Microsoft Windows XP, Windows Vista,
Windows 7, Windows 10, macOS, Linux.
Supported Web Browsers: Mozilla Firefox, Google Chrome, Apple Safari.
5.2. Establishing the Connection

ATTENTION! If the connection is made through the router's Ethernet
port, be sure that the computer is in the same network as the router.
If the computer has multiple Ethernet connections (e.g. wired and
wireless) you will have to know the IP address for the one that is
used for controlling the matrix.
#builtinweb #web
Step 1. Connect the matrix and the computer either via
▪ Ethernet, with LAN patch cable (to a hub, switch or router), or
▪ Ethernet, with LAN cross cable (directly to a computer).
Step 2. Change to the desired IP settings if it is needed.
Step 3. Type the IP address to the address bar of the web browser and
press enter (factory default address is 192.168.254.254).
5.3. The Layout of the Built-in Web
The built-in web page allows almost the same controlling functions
that are available via the Lightware Device Controller.
ATTENTION!
Only one web page is allowed to open simultaneously
to the same matrix. Other TCP/IP connections are prohibited.
MX-FR Series Modular Matrix Frames – User's Manual
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
68