Programmer's Reference - Lightware MX-FR9 User Manual

   

7. Programmer's Reference

7
P rogrammer's Reference
The user can connect to the matrix through Ethernet, serial port or USB. After establishing the connection, there
is no difference between connection types (except some rare cases, which are uniquely noted). Lightware matrix
routers can be controlled with external devices that can communicate according to the router protocol. Lightware
routers have a special protocol, but to interoperate with third-party devices, a secondary protocol is also provided.
The supported LW2 commands are described in this chapter:
ç Protocol Description
ç Instructions for the Terminal Application Usage
ç Storage Memories
ç Switching and Control Commands
ç Communication Setup Commands
ç Router Status Commands
ç System Commands
ç EDID Router Commands
ç Port Status Commands
ç I/O Port Commands
ç RICOD Related Commands
ç RS-232 over Fiber Commands
ç RS-232 over TPS Commands
ç Router Initiated Commands
ç Commands – Quick Summary
MX-FR Series Modular Matrix Frames – User's Manual
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
99