Commands - Quick Summary - Lightware MX-FR9 User Manual

   
7. Programmer's Reference
7.15. Commands – Quick Summary
Switching and Control Commands
Test Input and Preview Output
Selecting the 80th Input Port (MX-FR80R)
ȩ {TI=<value>}
Switching an Input to an Output
ȩ {<in>@<out>}
Switching an Input to All Outputs
ȩ {<in>@O}
Diagonal Switching
ȩ {<in>@D}
Batch Switch Outputs
Displaying the Current Connection States of the Outputs
ȩ {VC}
Listing the Mute/Unmute States of All Outputs
ȩ {VM}
Muting a Specified Output
ȩ {#<out>}
Unmuting a Specified Output
ȩ {+<out>}
Disconnecting an Output
ȩ {0@<out>}
Disconnecting All Outputs
ȩ {0@O}
Locking a Specified Output
ȩ {#><out>}
Unlocking a Specified Output
ȩ {+<<out>}
Saving a Preset
ȩ {$<id>}
MX-FR Series Modular Matrix Frames – User's Manual
Loading a Preset
Preset Preview
Renaming a Preset
Renaming an Input
Renaming an Output
Querying the Name of a Preset
Querying the Name of an Input
Querying the Name of an Output
Reloading the Default Preset Names
Reloading the Default Input Names
Reloading the Default Output Names
Communication Setup Commands
Querying the IP Settings
Reloading the Default IP Settings
Setting a Dynamic IP Address (DHCP)
Querying the RS-232 Baud Rate
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
ȩ {%<id>}
ȩ {VP#<id>=?}
ȩ {PNAME#<id>= <preset_name>}
ȩ {INAME#<in>=<input_name>}
ȩ {ONAME#<out>=<output_name>}
ȩ {PNAME#<id>=?}
ȩ {INAME#<in>=?}
ȩ {ONAME#<out>=?}
ȩ {PNAME#<id>=!}
ȩ {INAME#<id>=!}
ȩ {ONAME#<id>=!}
ȩ {IP_CONFIG=?}
ȩ {IP_CONFIG=!}
ȩ {IP_CONFIG=D}
ȩ {RS232BAUD=?}
146