Saving A Preset; Loading A Preset; Preset Preview; Renaming A Preset - Lightware MX-FR9 User Manual

   
7. Programmer's Reference
7.4.15. Saving a Preset
Save current crosspoint configuration (output states) to preset <id>. All frames have 32 preset memories.
Command and Response #preset
ȩ {$<id>}
Ȩ (SPR<id2>)CrLf
Example
ȩ {$4}
Ȩ (SPR04)CrLf
Current crosspoint state is saved to Preset 4, including the mute state of the outputs.

ATTENTION! Lock states are not saved. Lock state is assigned to the physical output of the router. Presets
do not affect output locks.
7.4.16. Loading a Preset
Load crosspoint configuration from preset <id>.
Command and Response
ȩ {%<id>}
Ȩ (LPR<id2>)CrLf
Example
ȩ {%4}
Ȩ (LPR04)CrLf
Current crosspoint state is changed according to Preset 4, including the mute state of the outputs.
INFO:
Locked outputs are left unchanged. Presets do not affect output locks.
7.4.17. Preset Preview
The peview of the stored preset <id> without loading it. The response depends on the crosspoint size.
Command and Response
ȩ {VP#<id>=?}
Ȩ (VP#<id>=•<O1>•<O2>•<O3>•<O4>•<O5>•<O6>•<O7>•<O8>•<O9>)CrLf
Parameters
Identifier Parameter description
<Ox> Output port number <in2>: <Ox> is connected to <in2>, <Ox> is not muted.
M<in2>: <Ox> is connected to <in2>, <Ox> is muted.
Example
ȩ {vp#3=?}
Ȩ (VP#3= 02 M02 M01 02 02 01 01 01 01)CrLf
Viewing connections for Preset 3. Input 2 is connected to Outputs 1, 2, 4 and 5. Input 1 is connected to all
other outputs. Outputs 2 and 3 are muted.
MX-FR Series Modular Matrix Frames – User's Manual
Parameter values
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
7.4.18. Renaming a Preset
Command and Response
ȩ {PNAME#<id>= <preset_name>}
Ȩ (PNAME#<id>= <preset_name>)CrLf
Example
ȩ {pname#1=First preset}
Ȩ (PNAME#1=First preset)CrLf
Preset 1 was named as 'First preset'.
7.4.19. Renaming an Input
Command and Response
ȩ {INAME#<in>=<input_name>}
Ȩ (INAME#<in>=<input_name>)CrLf
Example
ȩ {iname#3=Media_Player}
Ȩ (INAME#3=Media_Player)CrLf
Input 3 was named as 'Media_Player'.
7.4.20. Renaming an Output
Command and Response
ȩ {ONAME#<out>=<output_name>}
Ȩ (ONAME#<out>=<output_name>)CrLf
Example
ȩ {oname#2=Monitor#2}
Ȩ (ONAME#2=Monitor#2)CrLf
Output 2 was named as 'Monitor#2'.
7.4.21. Querying the Name of a Preset
Command and Response #preset
ȩ {PNAME#<id>=?}
Ȩ (PNAME#<id>= <preset_name>)CrLf
Example
ȩ {pname#1=?}
Ȩ (PNAME#1=First_preset)CrLf
Name for Preset 1 is 'First_preset'.
105