Port Status Commands; Input Port Status - Lightware MX-FR9 User Manual

   
7. Programmer's Reference
7.9. Port Status Commands
7.9.1. Input Port Status
Shows the actual status of the input ports. The response length changes according to the frame size. The
meaning of the values changes according to the input board types, as the boards have different functions
and capabilities.
Command and Response
ȩ {:ISD}
Ȩ (ISD•<input_d>)CrLf
Parameters
<input_d> may contain 9, 17, 33 or 80 hexadecimal numbers. Each number represents the state of the
corresponding input port. The meaning of the responded number depends on the actual board (port) type.
The binary representation of the responded hexadecimal numbers is shown below.
Board Type
MX-DVID-IB
MX-DVI-TP-IB
MX-DVI-TP-IB+
MX-DVI-OPT-IB
MX-DVIDL-IB
MX-DVIDL-OPT-IB
MX-HDMI-IB
MX-DVI-HDCP-IB
MX-HDMI-TP-IB
MXD-HDMI-TP-IB
MX-HDMI-OPT-IB
MX-DVII-HDCP-IB
MXD-UMX-IB
MX-3GSDI-IB
MX-HDMI-3D-IB, -S, -A
MX-4K-DVI-IB
MX-TPS-IB, -S, -A
MX-TPS2-IB-P, -AP, -SP
MX-4TPS2-4HDMI-IB, -A, -S
MX-4TPS2-4HDMI-IB, -A, -S
3. bit (MSB) 2. bit 1. bit
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 HDMI mode signal detect
0 HDMI mode signal detect
0 HDMI mode signal detect
0 HDMI mode signal detect
HDCP active HDMI mode TX detect
analog signal HDCP active digital signal
analog signal HDCP active digital signal
video detect audio detect type: 01=SD, 10=HD, 11=3G
HDCP active HDMI mode clock detect
HDCP active HDMI mode clock detect
HDCP active HDMI mode clock detect
HDCP active HDMI mode clock detect
HDCP active HDMI mode clock detect
HDCP active HDMI mode clock detect
Applied CPU2 firmware: v3.5.7b8 | LDC software: v2.5.17b2
MX-FR Series Modular Matrix Frames – User's Manual
▪ Source 5V: The connected source sends 5V.
Clock detect: TMDS clock is present.
▪
▪ Laser + Clock: Laser detected and TMDS clock is present.
▪ Signal Detect: Video signal is present (TMDS stream can be recognized).
HDMI mode: The incoming signal is HDMI.
▪
▪ HDCP active: The incoming signal is encrypted.
▪ TX detect: Communication with optical transmitter is OK.
▪ Analog signal: Video signal is present on the analog input.
▪ Digital signal: Video signal is present on the digital input.
Example #hdcp
ȩ {:isd}
Ȩ (ISD 113337770011000000000000000000007)CrLf
The first input board is an HDMI board. Input 1 and 2 have a connected source but no signal. Inputs 3-5 have
0. bit (LSB)
DVI signals and Inputs 6-8 have HDMI signals. The second input board is a DVI board. Input 11 and 12 have
clock detect DVI signals. The Test Input port has an HDMI signal.
clock detect

INFO: Both Clock Detect and Signal Detect can be used to check if there is an incoming signal.
clock detect
laser + clock
clock detect
laser + clock
source 5V
source 5V
source 5V
source 5V
clock detect
source 5V
source 5V
source 5V
source 5V
TPS link pres.
TPS link pres.
TPS link pres.
source 5V
118