Circuit Parameters]; Circuit Parameters] - [Times]; Circuit Parameters] - [Boost Times] - Ecolab DryExxEco Advanced-ETH Operating Instructions Manual

Layout of the software display
Overview: Circuit Parameters > Circuit parameters - Boost times
10.7.1

[Circuit parameters]

The cycle times and pause times of a lubrication circuit and the enabling signal are
displayed here. The start of the booster can also be carried out here.
Fig. 36: [Circuit parameters] - „home screen"
1
2 Plant number (sector)
3 Cycle time (actual)
4 Pause time (actual)
5 Status of the booster
6 Current release status
7
10.7.2

[Circuit parameters] - [Times]

The cycle and pause times of a lubricant circuit are set here.
Fig. 37: [Circuit parameters] - [Times]
1
2 Plant number (sector)
3 Cycle time (set)
4 Pause time (set)
10.7.3

[Circuit parameters] - [Boost times]

The separate booster function can be activated here.
Fig. 38: [Circuit parameters] - [Boost times]
1
2 Plant number (sector)
Rev. 02-09.2017
8
9
10 Current booster status
11 Pause time (set)
12 Cycle time (set)
13 Sequential valve number on the system
14 Circuit number
5
6 Sequential valve number
6 Circuit number
3 Activation time: (Set and actual). Time for the active
booster function.
70