System Settings" [Language]; Overview: „System Settings" [Signals] - Ecolab DryExxEco Advanced-ETH Operating Instructions Manual

Layout of the software display
System settings > Overview: System settings Signals
10.4.4

„System settings" [Language]

Pressing the
system language can be selected. Currently there are 26 European languages available
that are identified using the relevant national flags.
Fig. 17: „System settings" [Language]
1.
Press to open the selection overview of the languages.
ð The screen changes to the selection overview of the languages identified as
national flags.
2. Select the required language by pressing the corresponding national flag.
10.4.5 Overview: „System settings" [Signals]
For commissioning or maintenance work, the signal exchange can be checked here, but
not set. Digital outputs and valve enabling operations can be set for maintenance
purposes. The settings made are automatically deleted again following expiry of a preset
timer as they are only set for maintenance purposes in this situation.
Depending on the version and the current operating mode, not all buttons are
displayed (pos. A). The button [Digital Outputs] is only visible when the
Monitoring Dosing Quantity has been set to OFF (Pos. B).
For further info, see
[operating mode]" on page 74, Fig. 41 (Pos. 5).
Fig. 18: „System settings" [Signals]
Rev. 02-09.2017
(language selection) button in the „System settings" means that the
Ä Chapter 10.8.2 „Overview: [General parameters] -
58