Transport - Ecolab DryExxEco Advanced-ETH Operating Instructions Manual

1.5

Transport

The dimensions of the packaging and packing weight please refer to the "Technical Data"
chapter .
Improper transport
NOTICE!
Material damage due to improper transportation!
Transport units can fall or tip over if improperly transported.
This can cause a high degree of damage.
– Be careful when unloading the transport units on delivery and during
inhouse transport; observe the symbols and instructions on the packaging.
– Only use the attachment points provided.
– Remove packaging just before assembly.
DANGER!
Danger of commissioning a damaged component by the transport device
If transport damage is detected when unpacking the system or system
components, you must not install or commission any part of the system.
According to installation / comissioning of an damaged component
uncontrollable error may occur because of the use of aggressive metering
there can be irreparable damage to personnel and / or equipment.
Transport inspection
NOTICE!
Immediately check on receipt of the delivery that it is complete and free of
transport damages.
In case of visible damage, proceed as follows:
n Do not accept the delivery or accept provisionally.
Note down the extent of damage on the transport documents or on delivery slip.
n
n Lodging a complaint.
Claim for any damage as soon as you notice it.
Damage claims can only be filed within the applicable period for complaints.
9
General information
Transport
Rev. 02-09.2017