Manufacturer's Service Personnel; Personal Protective Equipment (Ppe); Explanation Of The Safety Symbols Used - Ecolab DryExxEco Advanced-ETH Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

Safety
Explanation of the safety symbols used > Personal protective equipment - PPE
Unauthorised personnel
DANGER!
Unauthorised persons who do not meet the requirements described here are
not familiar with the risks in the operating area.
Therefore unauthorised persons are at risk of injury.
Working with unauthorised persons:
– All work must be suspended for as long as unauthorised persons are
present in hazardous or working areas.
– If in doubt as to whether a person is authorised to be in the hazardous and
operating area, approach said person and lead them out of the operating
area.
– General information: Keep unauthorised persons away!
2.6

Manufacturer's service personnel

Service staff by manufacturer
Certain work may only be carried out by specialist staff of the manufacturer or by staff
authorised or specially trained by the manufacturer.
Other people or personnel are not authorised to carry out this work.
To carry out the work required, please contact our customer service.
2.7

Personal protective equipment (PPE)

DANGER!
Personal protective equipment, hereinafter referred to as PPE, is used to
protect personnel. It is imperative to pay attention to the PPE described in the
product data sheet for the metered medium.
2.8

Explanation of the safety symbols used

2.8.1
Personal protective equipment - PPE
Face guard
Protective eyewear protects the eyes against flying parts and liquid splashes.
The face protection is used to protect the eyes and face from flames, sparks or
glow as well as hot particles, exhaust gases or liquids.
Rev. 02-09.2017
WARNING!
Goggles or a face guard must be worn when working in
areas marked with the symbol opposite.
16

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

182839

Table of Contents