UniCarriers 1F1 Operator's Manual page 92

11. Check for full motion and proper function of all the steering and
travel controls.
12. Check steering wheel play.
13. Check that all guards, horn, lights, limit switches, warning and
safety devices, indicators, etc. are functional.
14. Check the condition of tires and wheels. Check for looseness, wear
or damage of wheel nuts and bolts.
• Remove objects that are embedded in the tread.
• Check for damage and friction of wheels and for bends and
cracks in the rim.
15. Check operation of hydraulic control valve.
16. Check mast operation for the following items:
• Smooth lifting and lowering
• Smooth roller rotation
• Wear or damage to chains
• Wear or damage on mast rail
• Lift bracket and forks for bends or damage
17. Conduct an operational check, including braking functions.
18. Check seat belt interlock option/seat switch lock out system by
starting the lift truck and then raise off the seat. In three (3) seconds
the hydraulic indicator light should light up.
19. Check seat belt and top panel lock.
20. Check the backrest and overhead guard for proper installation and
function.
21. Check forks and frame for cracks, breaks, bend and wear.
22. Check the fork latches.
23. Check the safety start system operation.
24. Check additional options, i.e. attachments or special equipment as
specified by the manufacturer or employer.
25. Check and verify capacity plates and decals are legible, if not
replace.
!
• Do not open the top panel with the engine running. Do not
place hands near the cooling fan because it rotates at a high
speed and may cause injury. When opening the hood, be
sure to turn off the engine. When starting the engine, check
the hood to make sure it is locked.
• If the lift truck is found to be in need of repair or in any way
unsafe, contributes to an unsafe condition, or becomes
unsafe in any way during operation, the matter shall be
reported immediately to your designated authority, and the
lift truck shall not be operated until it has been restored to
safe operating condition.
• Do not make repairs or adjustments unless specifically
authorized to do so.
• Be certain that your lift truck is the correct UL safety rating
type for the area in which you are working. The proper type
designation for the lift truck is on the data plate. In areas
classified as hazardous, use only lift trucks approved for use
in those areas. All hazardous areas should have classified
markings. If you are unsure of the classification of the area
you wish to enter, ask your designated authority before
entering.
90
WARNING