Position Of Data And Capacity Plates And Decals - UniCarriers 1F1 Operator's Manual

!
WARNING
• It is not recommended to use another lift truck to tow or
push a disabled lift truck.
• In case the lift truck must be towed for repair, the ignition
switch must be turned off.
• Attach towing device to only the traction bar, do not attach it
to the load carrying device (mast or carriage).
• Release the parking brake.
• If at all possible raise the load carrying device just off the
floor (ground).
POSITION OF DATA AND CAPACITY PLATES AND
DECALS
!
• When data and capacity plates or warning and caution
decals are damaged such that they cannot be read or have
peeled off, they should be immediately replaced with new
ones to ensure that they are continually maintained in a
legible condition. The plates and decals are available from
your Local Authorized Dealer.
• The warning and caution decals are affixed to the designated
locations of the lift truck as shown in the figure on page 29.
Before operating the lift truck, be sure to take note of the
details given in the decals so as to ensure proper and safe
operation.
28
WARNING