Table of Contents
Advertisement
2. Follow steps 2 through 4 in installing cylinder swing-out type (refer
to page 115-116).
3. While supporting the bottom of the LPG cylinder, slowly push the
holder up until it is in a horizontal position.
4. Follow step 5 through 8 in installing cylinder swing-out type (refer
to page 116).
5. Ensure hose is in clip and attached to radiator cover.
Removing Cylinder (Tank) Fixed Type
Follow steps 1 through 5, 8 & 9 in removing cylinder swing-out type
(refer to pages 114-115).
Installing Cylinder (Tank) Fixed Type
Follow steps 1 through 4 and 6 through 8 in installing cylinder swing-
out type (refer to pages 115-116).
REFILLING LPG CYLINDERS (TANKS)
!
• Only a trained and authorized person should refill LPG
Cylinders (tanks).
• Do not refill cylinders (tanks) while mounted on a lift truck.
• Make sure that you know and understand the proper
procedure for filling a LPG Cylinder (tank).
• Know all local fire codes.
• If you have any questions about refilling LPG Cylinders
(tanks)., please ask your supervisor.
• If problems with filling occur, call your LPG supplier.
The weight scale method to fill the cylinder (tank) is highly
recommended to protect the environment and to reduce fire hazards.
This method will reduce overfilling and the discharge of LPG into the
environment.
• Store full and empty cylinders (tanks) according to local fire codes.
• When filling LPG Cylinder (tank), always observe the local laws and
regulations.
117
WARNING
Hide quick links:
Advertisement
Table of Contents
