Seat Belt Interlock Or Shutdown Indicator (Red-Option); Maximum Speed Change Switch (Option) - UniCarriers 1F1 Operator's Manual

SEAT BELT INTERLOCK OR SHUTDOWN INDICATOR (RED -
OPTION)
This option is an interlock system that will
not let you start the lift truck without the
operator being in the seat with the seat belt
fastened.
If you should for any reason unlatch the
seat belt or lift yourself off the seat for more
then three (3) seconds you will activate a
shut down cycle, the shutdown indicator will flash red, the meter panel
will display "AUTO STOP", and will stop flashing when the cycle is
completed. The lift truck will then shutdown the engine. You will have
to return the ignition switch to the OFF position and restart the lift truck
once you have returned to the seat and fastened the seat belt.
When the cycle has started and the red light is flashing, the
transmission will shift to neutral and the hydraulic function will be shut
off. These functions will return to normal operating condition as stated
above. Refer to page 82 for Seat Belt Interlock options.

MAXIMUM SPEED CHANGE SWITCH (OPTION)

This switch is an optional setting
switch for electronic control
gasoline, LPG and dual fuel lift
trucks. It allows you to switch the
maximum speed between high
speed mode (H) and low speed
mode (L). Press the H side of the
switch if there is no need to limit
the maximum speed to a low
level, or press the L side to limit
the maximum speed to a low
level.
The light on the side you pressed illuminates, indicating the speed
mode that is currently selected.
!
• Do not change the maximum speed when the lift truck is
traveling. Doing so could cause the load to shift.
• Only your Local Authorized Dealer is allowed to change
the running speed settings. So, if necessary, ask them to
perform this change.
55
POWER (power mode)
ECO (Eco mode)
WARNING