Automatic Transmission - UniCarriers 1F1 Operator's Manual

AUTOMATIC TRANSMISSION

!
WARNING
• The lift truck will creep any time the forward or reverse
direction is selected and the brake or inching pedal is not
depressed.
• The parking brake must be set anytime the operator leaves
the seat because the transmission will go into neutral and
the lift truck may roll.
!
CAUTION
• While the lift truck is moving, do not change the direction of
travel, this may cause damage to the transmission or cause
the load to shift.
Forward
Reverse
Starting the lift truck from the stopped condition:
1. When the selector lever is in the neutral position:
• The lift truck will not move even if the accelerator pedal is
depressed.
2. When the selector lever is in the F or R position:
• The lift truck will move (creep) in the direction of the selector lever
position, the brake or inching pedal must be depressed to keep
the lift truck stationary.
NOTE:
If the parking brake warning light is illuminated, the transmission
can not shift into forward or reverse. When the selector lever is in the
"F" or "R" position and the parking brake is on, the display blinks.
Release the parking brake and shift the selector lever to the neutral (N)
position and then shift it again to forward (F) or reverse (R) in order to
drive. Refer to page 82 for Seat Belt Shift Interlock option.
While driving the lift truck:
3. When the selector lever is in the neutral position:
• The lever is in the neutral position independent of the lift truck
speed.
75