Lighting Switch And Turn Signal Switch; Lighting Switch; Turn Signal Switch; Fuel Change Switch - UniCarriers 1F1 Operator's Manual

Hide thumbs Also See for 1F1:
Table of Contents

Advertisement

LIGHTING SWITCH AND TURN SIGNAL SWITCH

Lighting Switch

To turn on one of the lamps in the table,
turn this switch to align the position bar (–)
on the switch knob with the corresponding
mark on the switch main unit.
Switch mark
OFF
!
CAUTION
• Do not touch the head lamp lens when the head lamp is lit or
immediately after the head lamp is turned off, because it is
very hot.
NOTE:
• You can turn on and off lamps by turning the lighting switch,
regardless of the position of the ignition switch.
• Do not forget to turn off all lamps when leaving the lift truck, or else
the battery may run down.

Turn Signal Switch

Push the switch lever forward (up) when turning
left, and pull it backward (down) when turning
right. The appropriate turn signal will blink. Upon
completion of the turn, be sure to return the
lever to its original position.
Position bar
Head lamp
Tail lamp
OFF
OFF
OFF
ON
ON
ON
FUEL CHANGE SWITCH (DUAL FUEL LIFT TRUCKS)
This switch is used to switch fuel from LPG to gasoline or vice versa.
LPG Position: Press to this position to
use LPG.
Neutral Position: Press to this position
to exhaust fuel from the fuel pipe.
Gasoline Position: Press to this
position to use gasoline.
The light on the fuel selection you
pressed illuminates, indicating the fuel
that is currently selected.
!
• Do not manipulate the LPG cylinder charge valve or plug,
otherwise the LPG may leak out into the atmosphere.
NOTE:
• Do not use the fuel-change switch to change fuels when the engine
is running. Change fuels only after the engine has completely
stopped.
• To switch from one fuel to the other, strictly follow the specified
procedure after warming up the engine (refer to pages 67-72).
• Operate the lift truck with gasoline for 30 minutes or several miles
(kilometers) at least once every two weeks, this will prevent gasoline
deterioration.
• The engine does not start when the fuel change switch is in the
neutral position. Do not forget to press the fuel choice before
starting the engine.
54
LPG position
Neutral position
Gasoline position
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1f2

Table of Contents