Clock; Setting The Time - UniCarriers 1F1 Operator's Manual

METER DISPLAY NOTE:
• The display time and date will be reset if the battery cable is
disconnected or the battery is replaced. If the display has been
reset, set the time and date again.
N
C
F R
E

Clock

When the ignition switch is turned ON, the start display appears,
followed by the normal display (clock).
Press the button to change the display to the date or press the
button to change the display to the hour meter.
10 : 25
H
F

Setting the Time

N
C
F R
E
Number change
10
mode
12
Press the button to change from hoursminutesconfirmed.
Press both the and buttons at the same time to return to the
previous display.
Press the button to change the number up.
Press the button to change the number down.
41
10 : 25
H
F
Press and hold
: 25 12 : 25
+
: 25 12 : 50
:
12 50
Confirmed